Vertex Air 3 Plus Pond Aeration System

Vertex Air 3 Plus Pond Aeration System

Brand: Vertex
Product Code: 7
Availability: In Stock
Ex Tax: $2,650.00

Available Options

* Bottom Line Tubing:

The Air3 Plus™ pond aeration system benefits
 • Tested pumping capacity up to 14,300 GPM
 • Vertex ½ Hp HighFlow™ compressor has highest rated flow
 in its class
 • Vertex FlowControl™ equalizes airflow to all disks
 • Vertex SafeStart™ protects compressor during
 pressurized restarts
 • Increases oxygen levels throughout entire water column
 • Prevents low oxygen fish kills & expands oxygenated
 fisheries habitat
 • Reduces nutrients while oxidizing & reducing bottom muck
 • Reduces nuisance algae & eliminates toxic gasses and
 foul odors
 • Reduces aquatic midge and mosquito insect hatches
 • Safe entry-no electricity in the water
The Vertex Air 3 Plus™ pond aerator is a super-efficient, affordable system designed to maximize aeration in 3-5 acre ponds with irregular shapes and depths. The Air 3 Plus™ has the same 1/2 hp Brookwood™ SafeStart™ compressor that  our HighFlowTM systems use. It’s housed in the same rustproof aluminum outdoor cabinet as our standard Air 3™  system, yet boasts a larger manifold with a fourth valve and CoActive AirStation™. The additional AirStation™ can be placed in cove areas, finger canals, behind shallow sandbars, or anywhere in the water body where the pond’s shape or bottom contour will limit the oxygen flow from fewer diffusers.
The Air 3 Plus™ utilizes Vertex's MicronBubble™ technology, allowing vital oxygen to be absorbed and poisonous gasses expelled. With no electricity in the water, Vertex's aeration systems are safe for any type of water recreation. Our systems have a full two-year warranty plus a lifetime warranty against rust and corrosion on the cabinet, five-year warranty
 on the AirStations™ and a 15-year warranty on BottomLine™  supply tubing.

brookwood-piston-compressor-highflow-half-hpBrookwood™ HighFlow™ Compressor

• ½ Hp Vertex HighFlowTM Series
• Vertex SafeStartTM Technology
• 5.6 CFM, 25 PSI, 115v or 230v
• Highest flow rate of any compressor in its class
• Thermal overload protection
• 2-4 year extended duty cycle between scheduled maintenance
• Full two-year warranty

1/2hp, 115v, 5.6 CFM, 25 PSI, single phase, twin cylinder piston
type compressor. Also available in 230 volt 50&60 Hz. UR, CE, CSA
listed and built for continuous 24/7 operation. Super-duty Brookwood HighFlow™ compressors incorporate upgraded rotors, stators, bearings and capacitors and are thermally protected, oil-free, and require no lubrication; just periodic replacement of air filter. Extended duty cycle is approximately 2 to 4 years for compressor service, about 2 to 4 times the duty cycle of ordinary piston and rotary vane compressors. All new Brookwood™ HighFlow™ compressor systems carry a two year warranty.

quietair-cabinet-2QuietAir™ Cabinet

• Class "A" GFCI protection on all 115V circuits
• Powder coated aluminum for a durable attractive finish
• High capacity 290 CFM fan
• Easy access design with barrel lock for security
• Easy plug-in connection to waterside electrical service
• Heavy duty mounting pad included
• Five-year warranty

Enclosure comes equipped with barrel lock for security, fully gasketed and constructed of aluminum with gray electrostatically-bonded powder coating to provide lifetime warranty against rust. Enclosure furnished with stamped ventilation grills to insure forced air circulation and an integral cooling fan with thermal protection, producing 290 CFM to guard against excessive compressor operating temperatures. This system is equipped with Vertex SafeStart™ technology allowing auto restart under maximum rated
pressure without motor damage. Cabinet provided with HDPE mounting pad (24" x 24" x 2"). 115 volt enclosures come equipped with a class A GFIC circuit protection for all electrical components. 230 volt systems require the purchaser to provide GFIC protection on their electrical supply circuit.

2-9-inch-diameter-flexible-membrane-diffusersCoActive™ AirStations™ Assembly™

• Tested system pumping rate,up to 14,300 GPM
• Eight 9" flexible membrane disks with MicronBubble™ technology
• Self-cleaning, low maintenance and five year warranty
• Rugged EPDM construction
• Vacuum formed and sonic welded HDPE base unit
• Lipped edge prevents sinking into soft bottom sediments
• Five-year warranty

Two air diffusers each consisting of two self-cleaning, 9" diameter, flexible membrane disks of EPDM compound with 100% rebound memory, producing millions of fine 500 to 3000 micron bubbles. Includes FlowControl™ technology that equalizes airflow to all diffusers on uneven bottoms. Each diffuser station is equipped with vacuum formed HDPE base, sonic spot-welded to provide unit integrity. Base unit (17.25"L x 13.25"W x 3.35"D) has a hollow
chamber design for the addition of inert pea gravel ballast and has a lipped design to prevent settling into soft bottom sediments. AirStations™ have been independently tested and verified to provide stated pumping rates. Five year warranty.

bottomline-supply-tubingBottomLine™ Supply Tubing

• Over-sized 0.58" ID for high flow
• Heavy duty wall thickness for durability
• Self-weighted for easy installation
• Available in 100 and 500 feet increments
• 15-year Vertex warranty

Self-weighted, direct burial submersible tubing for connection from compressor to diffuser stations. Tubing is flexible PVC composite construction for use with standard PVC solvent weld cement and 0.5" insert fittings. Tubing has a smooth walled
0.58" I.D. for extra high flow rates with minimum friction loss to reduce backpressure and extend compressor life. 0.235" wall thickness provides long-term durability and protection against kinking and punctures. BottomLine™ tubing remains flexible in cold temperatures allowing for easy year round installations

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Panel Tool


Parse error: syntax error, unexpected ')' in /home/content/45/11281745/html/index.php(342) : runtime-created function on line 1

Fatal error: Function name must be a string in /home/content/45/11281745/html/index.php on line 342